HELMI — FIN 10245
Model: Oceanis 323
Updated
HELMI (FIN 10245) is a Oceanis 323 designed by Jean-Marie Finot and built by Beneteau. She has been racing since 2026. She sails with a larger sail plan than most Oceanis 323s. Against a typical Oceanis 323 she is quicker upwind in light air and downwind, and slower on a beam reach.
Racing record
91
Race Edge
Oceanis 323: 75
590.1s/mile
Rating 2026
Race Edge by wind strength: how much she delivers beyond her rating, compared with the other boats in her class.
Length
9.72 m
31′ 11″
Beam
3.25 m
Draft
1.80 m
Displacement
4.1 t
Sail area
51 m²
On the podium
Where HELMI finishes when she goes racing.
Not enough data yet for her podiums: we have not found her in a race with six boats or more, measured on handicap.
Regattas
Every regatta we found with HELMI on the start line, named as the organisers publish them.
- JVS Kevätmatkapurjehdus20268
Is there a race missing?Send us the results and we will add them here.
Report a regattaHow HELMI compares with a typical Oceanis 323
Her main 2026 measurements against the middle of the fleet: one boat per sail number, the latest full-crew configuration with spinnaker, Oceanis 323s measured since 2025.
Above the line she is quicker than a typical Oceanis 323; below, slower. Move the wind: plenty of boats sit on one side in the light and the other when it blows.
Full width is 0.6 kn either way.
At 10 knots she gives away time to a typical Oceanis 323 on the beam reach.
Speed at every angle
HELMI in blue, a typical Oceanis 323 dashed.
HELMI in blue, a typical Oceanis 323 dashed; green marks the closest useful beat and the deepest run worth sailing.
Other Oceanis 323s racing
Every sister ship with results on TackRegatta, the most recently raced first.
More about the Oceanis 323
Speed at every angle, Race Edge, the race record of the whole fleet and how the boats are set up.
Something wrong in HELMI's data? A regatta, a result, her design or her sail number.
Tell us →