Class CHeavy displacementCruiser/Racer

Contessa 32

J.Rogers · David Sadler · 1971

Updated

Measured under the previous VPP (2021–2024)

The Contessa 32 is a 9.70 m heavy displacement racing yacht designed by David Sadler and built by J.Rogers, first launched in 1971. It races in Class C.

Contessa 32 - David Sadler - J.RogersP 9.75 mLOA 9.70 m

Length

9.70 m

31′ 10″

Beam

2.85 m

Draft

1.72 m

Displacement

4.5 t

Sail area

45 m²

No boat of this design has been measured under the current VPP. The figures below come from measurement records issued between 2021 and 2024, on the earlier scale, so this design carries no Race Edge.

On the podium

Where a Contessa 32 finishes when she goes racing.

Not enough data yet to show how this design finishes. It has not been found in the race results we have collected so far.

Recent regattas

The latest events where a Contessa 32 was on the start line, named as the organisers publish them.

No regattas found yet.

Raced one we are missing?

Report a regatta

Round the buoys, or offshore

A short windward-leeward and a night at sea ask different things of a boat. Here is how this one does in each.

Round the buoys

—

Not enough data yet: no races of 10 NM or less carry a published distance.

Offshore & coastal

—

Not enough data yet: no races over 10 NM carry a published distance.

Who she races against

The designs a Contessa 32 actually lines up with, most often first. The bar shows how those meetings ended.

Not enough data yet to say who this design races against. No result we have collected puts it on the water beside another design we track.

Speed at every angle

The shape of this design's speed, drawn from the measured fleet. Pick a wind and watch it stretch.

3630°60°90°120°150°WIND

Speed in knots at 20 knots of true wind. Green marks the angles that pay: the closest useful beat and the deepest run worth sailing.

How fast is a Contessa 32

Boat speed in knots, by true wind angle and wind strength.

Angle6 kn10 kn14 kn20 kn
Beat VMG3.384.124.47—
52°5.005.966.33—
60°5.216.126.47—
75°5.376.266.64—
90°5.486.456.80—
110°5.616.587.06—
120°5.486.547.09—
135°5.046.326.93—
150°4.445.816.51—
Run VMG3.845.076.00—

How they are set up

The range each sail spans across the fleet.

Mainsail18 m²
Headsail26 m² – 28 m²
Gennaker53 m² – 59 m²
Spinnaker65 m² – 67 m²

Nearly all carry a folding propeller. A bowsprit is standard across the fleet. Crew weight is declared around 420 kg.

Rigging

Contessa 32 rig and sail dimensions

A Contessa 32 carries 9.75 m of mainsail hoist on a 3.05 m boom, a forestay 11.39 m above the deck and a 4.02 m bowsprit. Typical figures across the 4 boats measured under the current VPP, with the range each one spans.

Rig

Mainsail hoistP9.75 m9.75 – 10.00
Boom lengthE3.05 m3.05 – 3.20
Forestay heightIG11.39 m11.39 – 11.39
Fore triangle baseJ3.85 m3.83 – 3.85
Spinnaker hoistISP11.45 m11.40 – 11.50
BowspritTPS4.02 m3.85 – 4.83
Boom above deckBAS1.38 m1.38 – 1.38

Sails

Mainsail17.7 m²17.7 – 18.3
Headsail27.6 m²25.8 – 28.1
Gennaker54.6 m²52.8 – 58.9
Spinnaker65.9 m²65.0 – 66.8

The spinnaker spreads widest of all — 53 to 59 m² depending on bowsprit and set-up. Before ordering a sail, read the figure on your own measurement record rather than the typical one for the design.