Class BDisplacementPerformance

Corby 36

Yacht Service · John Corby · 1995

Updated

The Corby 36 is a 10.85 m displacement racing yacht designed by John Corby and built by Yacht Service, first launched in 1995. It races in Class B.

Corby 36 - John Corby - Yacht ServiceP 14.17 mLOA 10.85 m

Length

10.85 m

35′ 7″

Beam

3.15 m

Draft

2.28 m

Displacement

4.9 t

Sail area

75 m²

This design does not carry a Race Edge. The speeds below still come from measured boats.

On the podium

Where a Corby 36 finishes when she goes racing.

4

Wins

2

Seconds

1

Thirds

7

Starts

Not enough races yet for a percentage — these are the counts so far. We keep collecting results, so this will fill in.

Read from 7 starts by 2 boats between 2019 and 2024, counting races with six boats or more.

Recent regattas

The latest events where a Corby 36 was on the start line, named as the organisers publish them.

  • AustraliaPittwater Regatta - NSW ORC Championship2024
  • Netherlands50 Mijl Doublehanded2019

Raced one we are missing?

Report a regatta

Round the buoys, or offshore

A short windward-leeward and a night at sea ask different things of a boat. Here is how this one does in each.

Round the buoys

—

Not enough data yet: 5 races of 10 NM or less carry a published distance.

Offshore & coastal

—

Not enough data yet: 1 race over 10 NM carry a published distance.

Who she races against

The designs a Corby 36 actually lines up with, most often first. The bar shows how those meetings ended.

This design aheadRival ahead
Young 88100%ahead in 12 of 12 meetings, 6 races

Also met, too few times for a figure:

Beneteau 40.7 (6 meetings), J/99 (6 meetings), Bull 900 (6 meetings), Sun Fast 3300 (Andrieu) (6 meetings), First 34.7 (6 meetings), Ker 33 (6 meetings), IMX 40 (6 meetings), J/122 (2 meetings), F & F 65 (2 meetings), J/120 (1 meeting), J/111 (1 meeting)

Some of the boats it races against

How the Corby 36 has fared against each of them, boat against boat on corrected time. Ordered by how often the two meet, not by who wins.

Corby 36 vs Young 88ahead 100% of 12 head-to-heads

Speed at every angle

The shape of this design's speed, drawn from the measured fleet. Pick a wind and watch it stretch.

36930°60°90°120°150°WIND10.7

Upwind VMG

5.60

37°

Beam reach

8.82

90°

Broad reach

10.68

135°

Downwind VMG

8.50

170°

Speed in knots at 20 knots of true wind. Green marks the angles that pay: the closest useful beat and the deepest run worth sailing.

Where it wins and where it pays

Every boat is judged against its own measurements — length, weight, sail area. The quicker those say it should be, the more it has to deliver just to break even. Going fast is not enough: it has to go faster than its own numbers promised.

This is a boat that wants breeze. Give it a fresh day and long legs and it delivers more than it promised; in a drifter it is working uphill.

Where it gains

Its best ground is on a broad reach in a strong breeze, where it does more than its size and sail area promise, and by a margin worth having. It holds that advantage downwind as well, so the gain is not down to one leg of the course.

Where it pays

There is no condition where it falls away badly, which is worth something over a season of mixed weather.

Above the line it delivers more than promised and gains on the fleet. Below, it falls short. Move the wind: plenty of boats sit on one side in the light and the other when it blows.

True wind
Upwind+0.21 kn
Beam reach+0.05 kn
Broad reach+0.07 kn
Downwind+0.17 kn

Full width is 0.6 kn either way.

At 10 knots this design makes back more than its rating asks on the upwind.

How fast is a Corby 36

Boat speed in knots, by true wind angle and wind strength.

Angle6 kn10 kn14 kn20 kn
Beat VMG3.855.115.445.60
52°5.817.257.547.70
60°6.107.417.747.94
75°6.297.538.068.37
90°6.377.628.258.82
110°6.207.818.549.30
120°6.057.758.7410.00
135°5.447.428.4310.68
150°4.566.767.909.59
Run VMG3.945.877.158.50

How they are set up

The range each sail spans across the fleet.

Mainsail41 m² – 43 m²
Headsail33 m² – 36 m²
Gennaker95 m² – 108 m²
Spinnaker110 m² – 112 m²

Nearly all carry a folding propeller. A bowsprit is standard across the fleet. Crew weight is declared around 630 kg.

Rigging

Corby 36 rig and sail dimensions

A Corby 36 carries 14.70 m of mainsail hoist on a 4.90 m boom, a forestay 15.23 m above the deck and a 5.04 m bowsprit. Typical figures across the 3 boats measured under the current VPP, with the range each one spans.

Rig

Mainsail hoistP14.70 m14.17 – 14.78
Boom lengthE4.90 m4.75 – 4.92
Forestay heightIG15.23 m15.16 – 15.72
Fore triangle baseJ4.30 m4.29 – 4.45
Spinnaker hoistISP16.36 m15.74 – 16.45
BowspritTPS5.04 m4.79 – 5.69
Boom above deckBAS1.53 m1.50 – 1.61

Sails

Mainsail41.0 m²40.9 – 42.7
Headsail33.5 m²32.5 – 35.5
Gennaker98.0 m²94.8 – 107.5
Spinnaker111.9 m²110.4 – 112.0

The spinnaker spreads widest of all — 95 to 108 m² depending on bowsprit and set-up. Before ordering a sail, read the figure on your own measurement record rather than the typical one for the design.